Elation MASTER BLASTER 1200 Manual Download Page 3

©

Elation Lighting

® - 

www.elationlighting.com - Master Blaster 1200™ Instruction Manual Page 5

Warnings

•   Be  sure  to  save  the  packing  carton  in  case  you  may  ever 

  have to return the unit for service.

•  Do not spill water or other liquids  in to or on to your fogger. Be 

  sure that all the fog fluid is kept inside the fluid reservoir.

•   Be sure that the local power outlet match that or the required 

  voltage for your fog machine.

•   Do  not  attempt  to  operate  this  unit  if  the  power  cord  has

  been frayed or broken. Please route your power cord out of the 

  way of foot traffic.

•   Do not attempt to remove or break off the ground prong from 

  the  electrical  cord.  This  prong  is  used  to  reduce  the  risk  of 

  electrical shock and fire in case of an internal short.

•   Disconnect from main power before making any type of con-

  nection.

•   Do not remove the top cover under any conditions. There are 

  no user serviceable parts inside.

•   Disconnect the unit’s main power when left unused for long 

  periods of time.

•   Never connect this unit to a dimmer pack

•   Always be sure to mount this unit in area that will allow proper 

  ventilation. Allow about 6” (15cm) between this device and a 

  wall.

•   Never block the ventilation holes.

•   Do not attempt to operate this unit, if it becomes damaged in 

  any way.

•   Never operate this unit when it’s cover is removed.

Features

•     1200 watt professional heater core.

•     18,000 cubic feet of fog output.

•     Rear on/off switch

•     Built in fuse protection

•     2.5 liter tank capacity.

•     Wired timer/volume remote control.

•     Built in E.T.S.™ - (Electronic Thermal Sensing™).

•     User serviceable heater core.

•     Standard DMX -512 protocol.

•     Optional wireless remote control.

•     Optional Master Blaster Pump Kit™ available.

General Instructions

Please read and understand the instructions in this manual 

carefully and thoroughly before attempting to operate this 

unit.  These instructions contain important information regarding 

safety during use and maintenance. Please keep this manual 

with the unit, as future reference.

©

Elation Lighting

® - 

www.elationlighting.com - Master Blaster 1200™ Instruction Manual Page 6

Summary of Contents for MASTER BLASTER 1200









Reviews: