3
7.
SPEED
adjuster upon CH5-8 / CH13-16:
To control the Chase speed for 5-8 channels and 13-16 channels. Chase speed
adjustment for 13-16 channels can be available under the 16 channels output mode only.
User can get higher (lower) speed levels by adjusting the knob towards “Max” ( “Min”).
8.
CH1-8 / CH1-16
selector:
To select 8 channels output or 16 channels output as the user’s desire.
9.
FLASH / LATCH selector:
Switch to FLASH or LATCH position for FLASH or LATCH function upon relevant
channel buttons under 16 channels output mode.
10.
FLASH
SPEED selector:
Used to control the flash speed of external strobes respectively. There are three options:
(1) AUDIO
－
flash speed can be controlled by audio signals.
(2) FLASH
－
flash speed can be controlled by FLASH SPEED adjuster.
(3) OFF
－
switch off the strobes.
11.
Mode Button:
Used to select Chase programs between program 1 and program 16 under the
MANUAL mode. Each tap will change the Chase program once. The left Mode button is
for CH1-4 / CH9-12, and the right Mode button is for CH5-8 / CH13-16.
12.
MANUAL / AUTO selector:
Switch to MANUAL mode to run anyone of the 16 built-in programs manually. While
switching to AUTO mode, all the 16 programs will run circularly and automatically. The
left selector controls CH1-4 / CH9-12, and the right selector controls CH5-8 / CH13-16.
13.
CHASE mode selector:
Used to select corresponding Chase speed control mode. There are three options:
(1)
AUDIO
－
controlled by audio signals.
(2)
×
1
－
controlled by the SPEED adjuster, the fastest Chase speed can be within a
few seconds.
(3)
10 min
－
controlled by the SPEED adjuster, the slowest Chase speed can come to a
few minutes.
The left selector controls CH1-4 / CH9-12, and the right controls CH5-8 / CH13-16.
14.
EFFECT Switches (
×
8):
Use these switches to enable (switch to the “on” position) or disable (switch to the “off”
position) corresponding channel output.
15.
CHANNEL Buttons (
×
16):
These buttons can lock (LATCH) or trigger (FLASH) the relevant channel output
respectively. (According to the FLASH / LATCH selector functions)
16.
Channel LED:
To indicate the working states of relevant channel output.
17.
STAND BY LED:
To indicate the relevant states of STAND BY function. LED “on” means the output is
disabled, while “off” means relevant output is enabled.
18.
STAND BY button:
Used to disable the overall output momentarily. While pressing this button for a second
time, the channel output will be reactivated.
19.
READY LED:
To indicate the working states of Fog Machine. Relevant lighted LED means the Fog
Machine is READY for running.
20.
HEATING LED:
To indicate the connecting states of the Fog Machine. Relevant lighted LED means the
connection is OK.
21.
Fog
Machine trigger:
To control the working states of the Fog Machine.
