Elation KL FRESNEL 8, User Manual

Page: 16 / 26

16
SYSTEM MENU - Supports Software Versions: ≥ 1.08
Features subject to change without notice.
MAIN MENU SUB MENU OPTIONS / VALUES
(Default Settings in BOLD )
DESCRIPTION
Address
Address 001 ~ XXX Set DMX Address Setting
UserMode User Mode
Dimmer /
Dimmer 16bit
/ 3CH / Standard / Extended
Set DMX Channel / User Mode
Function
Status Lost Dmx Hold / Black Function If NO DMX Detected
LCD. Set
Display ON / OFF
OLED Display Screen Saver Mode
*When ON goes off after 30 seconds.
ONLY WHEN DMX IS CONNECTED.
Key Lock ON / OFF Control Front Panel Buttons Key Lock
Flash ON / OFF Display flashes when NO DMX
Invert ON / OFF Flip LCD Display 180º
Temp. C/F
C / F
Temperature Switch Between C˚/ F˚
Dim Mode
Standard , Stage, TV, Architec, Theatre. Stage2, 0.0s,
0.1s, 0.2s, 0.3s, 0.4s, 0.5s, 0.6s, 0.7s, 0.8s, 0.9s, 1.0s,
1.5s, 2.0s, 3.0s, 4.0s, 5.0s, 6.0s, 7.0s, 8.0s, 9.0s, 10.0s Set Dimmer Mode
Disp. Set ADDR , Disp.CH, Salve Set Information to Display on LCD
Fan. Set Led Fan Auto / High / Low Set LED Fan Speed
Dim Curve
Linear
/ Square / INV-Square / S-Curve Set Dimmer Curve Mode
Frequen
900Hz, 1000Hz, 1100Hz, 1200Hz , 1300Hz, 1400Hz, 1500Hz,
2500Hz, 4000Hz, 5000Hz, 10Hz, 15Hz, 20Hz, 25Hz
Set LED Refreash Frequency
USB_Data ON,
OFF
Software Update Port - Contact
Service
MasterSW ON,
OFF
DFSE ON, OFF Restore Factory Settings
Info
TimeInfo
Current 000 (Hours) Fixture Run Time From Power ON
Total 000 (Hours) Fixture Total Run Time
Last 000 (Hours) Clear Fixture Last Run Time
Password PIN= 050 Enter PIN to Access Clear Last. Menu
Clear ON / OFF Reset Fixture Last Run Time
TempInfo Led Temp 000 C / F Temperature of LED
Err. Info Error Record 1 ~ Error Record 10 Display 10 Recent Error Messages
ModelInf KL F8 Display Model Name
Software Software V1.08
Software Version
(Greater than or Equal to)
Test
Reset.M Zoom Reset Zoom Motor
ManCtrl
Dimmer 000 - 255
Manual Control Functions Strobe
000 -
255
Zoom 000 - 255
Caibrat
Password PIN= 050
Calibration