Elation Professional • Los Angeles, CA.
Error! Reference source not found.
/
Error! Reference source not found.
)
28
8.
MAINTAINING AND CLEANING THE IMPRESSION 120RZ
The Impression 120RZ is a system of very low maintenance. It is only necessary to
clean the air in- and outlets as well as the optical LED lenses from time to time. For a
safe operation it is absolutely essential that the fixture is kept clean and that dust, dirt
and smoke-fluid residues must not built up on or within the fixture. Otherwise the
fixture's light-output will be significantly reduced or damages can occur. Regular
cleaning will not only ensure the maximum light-output, but will also allow the fixture
to operate reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recom-
mended, under no circumstances should alcohol or solvents be used!
1.5 Safety regulations
•
Pull out the main plug!
•
Wait min. 15 minutes after the last operation to cool down the fixture.
1.6 Circumference and Interval (rule-of-thumb)
The contamination of the fixture depends on the environment details. Hence no
general guidelines can be given. The intervals given below are only suggestions
from our practice experience.
Position
Interval
In this way
LED reflector and optical system
Weekly
Soft brush /lint-free cloth
Fan and air channel
Monthly
Vacuum cleaner, airbrush, etc.
Attention:
•
Never let optical parts come into contact with oil or fat.
•
Before running the fixture wait until all parts are dried up.
•
Never tough lenses with bare fingers.
