Duration:
1. This function allows you to set how long the fog burst will last,
when in timer mode.
2. You can adjust the length of the fog burst from one second to
200 seconds.
3. To set the duration, turn the duration knob in a clockwise/counter-
clockwise direction. Turning the knob clockwise will increase the
duration, turning the knob counter-clockwise will decrease the
duration.
Interval:
1. In timer mode, this function allows you to set the time interval
between fog bursts.
2. Fog burst interval can be set from one second to 200 seconds.
3. To set the interval turn the interval knob in a clockwise/counter-
clockwise direction. Turning the knob clockwise will increase the
interval, turning the knob counter-clockwise will decrease the
interval.
Timer On/Off:
1. This Function allows you to set the fogger on an automatic setting.
You can set the Interval, Duration, and as described at the top of
the page.
2. This button allows you turn the timer function on and off. A glowing
yellow LED will indicate this function is activated.
Continuous:
When this button is pushed the fogger will run continuously without
stopping until the button is pushed again or the tank runs out of fog
fluid.
Manual:
When this button is pressed it will emit fog as long as the button is
held down.
Ice Flow™
Remote Control Instructions
©
Elation Supply
®
- www.elationlighting.com - Ice Flow™ Instruction Manual Page 11
©
Elation Supply
®
- www.elationlighting.com - Ice Flow™ Instruction Manual Page 12
Ice Flow™
Trouble Shooting
If you experience low fog output, pump noise, or no fog output at all,
disconnect and discontinue use immediately. Do not continue push-
ing the remote controlʼs activation button as this may damage the Ice
Flow™. Check fluid level, the external fuse or breaker, remote connec-
tion, and be sure the wall outlet is sending power. If all of the above
appear to be okay, and the unit fails to operate correctly, the unit may
require service. Please contact customer support for further instruc-
tions. Please do not return the unit to your dealer without contacting
customer support first.
To help prevent the unit from clogging, use Elation
®
Clean Machine™
liquid. Clean Machine is recommended when storing your fogger for
more than 1 week, or at least once a month as normal maintenance
under regular usage. Clean Machine removes particle build up in the
heater and gives longer life to the fog machine. Clean Machine is like
a tune up for your fog machine! Clean Machine is available in gallon
or quart bottles.
Ice Flow™
Clean Machine
Ice Flow™
Draining Switch
The drain switch on the back is for emptying the water produced by
the melted ice, out of the unit. There are two modes of draining the
water, automatically and manually.
Auto ( I ) -
A sensor inside the unit will activate the pump when a cer-
tain water level is reached. The pump will empty the water out of the
unit.
Manual ( II ) -
When the manual mode of draining is selected, the
pump will turn on instantly and pump whatever water is in the unit, out
of the unit.
