Elation Fuze SFX, User Manual

Page: 13 / 42

13
G O B O I N STA L L AT I O N
1. Place the fixture on a stable flat surface in a DUST-FREE , INDOOR location, and ensure that
the unit has been disconnected from power and given at least 15 minutes to cool down
after powering down . Engage both the Pan Lock (location shown at above left) and the Tilt
Lock (location shown at above right). For the purposes of this procedure, we will assume
that the head has been fixed in an upright position with the lens oriented upwards.
2. Use a Phillips head screwdriver to loosen the four (4) fasteners on each of the covers.
Please note that these fasteners are of the twist-lock variety, and do not come free of
the covers . Remove the safety cable clips securing each cover to the fixture.