w w w . e l a t i o n l i g h t i n g . c o m
7
ELAR EXTQW BAR HP
™
User Manual 1.0
S A F E T Y I N S T R U C T I O N S
The
ELAR EXTQW BAR HP
™
is an extremely sophisticated piece of electronic
equipment. To guarantee a smooth operation, it is important to follow the
guidelines in this manual. The manufacturer of this device will not accept
responsibility for damages resulting from the misuse of this fixture due to the
disregard of the information printed in this manual.
•
For proper operation, follow the
Installation
guidelines described in this manual. Only qualified
and certified personnel should perform the installation and only the original rigging parts
(brackets, holders, clamps, safety cables) included with this fixture should be used for installation.
Any modifications will void the original manufactures warranty and increase the risk of damage
and/or personal injury.
•
Never look directly into the light source to prevent risk of injury to your retina, which may induce
blindness. Those suffering from
EPILEPSY
should avoid looking directly into the light source of this
unit at all times.
•
The fan and air inlets must remain clean and never blocked. Allow approx. 6” (15cm) between
this fixture and other devices or a wall for proper cooling.
•
Always disconnect from main power source before performing any type of service and/or
cleaning procedure. Only handle the power cord by the plug end, never pull by tugging the wire
portion of the cord.
•
Do NOT operate fixture if the power cord has become frayed, crimped and/or damaged. If the
power cord is damaged, replace it immediately with a new one of similar power rating.
•
Do NOT operate fixture near any flammable materials.
This device falls under
PROTECTION CLASS 1
. It’s essential this device is
grounded properly, and only qualified personnel perform all electrical
connections
.
