Elation E Spot Led, User Manual, Page: 40 / 56

E SPOT LED™
©Elation Professional, Los Angeles Ca. 40 www.ElationLighting.com
• When you get to the “Program 1” function tap the “ENTER” button. The screen will
then change to Edit Steps 01. Use the “UP” and “ DOWN” buttons to toggle through
the scenes created in “ Step 1.” Press the “ENTER” button to add a scene to the
program. Tapping the “Enter” button will automatically lock the selected scene into
the programs’ memory. Repeat the process until all the desired scenes have been
added to the program. Each program can store a maximum of 64 scenes.
• To test the program access “Program Test” in the “Program Edit” menu function.
Step 3 – Playing a Program
To initiate a program follow the procedure below:
• Access the main menu and use the “ Up” and “Down” to toggle to “Function Mode”
and tap the “Enter” button.
• In the next screen select “Auto Program” and tap the “Enter” button.
• There are now two selections, “ Master” and “ Alone.” Select “Master” when running
multiple fixtures in a master/slave configuration. See section 10.2 “Master/ Slave
Operation” on page 36 for proper set-up instructions. Select “Alone” when running a
single fixture or when multiple fixtures in stand-alone mode. See section 10.1
“Stand -Alone Operation” on page 36 for proper set-up instructions.