manualshive.com logo in svg

Elation E Spot Led, User Manual

Share
Download
Elation E Spot Led User Manual Download Page 24

 
 

E SPOT LED™  

©Elation Professional, Los Angeles Ca. 

24 

 

www.ElationLighting.com

   

 

4.  Press MODE/ESC to return to the main menu. 

 

 

 

GOBO 

 

- When you activate this reset function, the fixture will only reset the gobo 

wheel motor. 

1. 

Access the main menu. 

2. 

Tap the UP button until “RESE” is displayed, press ENTER. 

3. 

Tap the UP button until “GOBO” is displayed, press ENTER to confirm and begin 

the reset process.   

4. 

Press MODE/ESC to return to the main menu. 

 

 

OTHR 

  - When you activate this reset function, the fixture will only reset any motor not 

specified in the other reset commands previously listed. 

1.  Access the main menu. 

2.  Tap the UP button until “RESE” is displayed, press ENTER. 

3.  Tap the UP button until “OTHR” is displayed, then press ENTER to confirm. 

4.  Press MODE/ESC to return to the main menu. 

 

 

 

 

5.  TIME MENU - 

 

LIFE

 - Displays the fixtures total running time. 

CLMP

 - Clears the lamp running time. 

 

LIFE

 

 

 

- With this function you can display the total running  time of the fixture.   

1.  Access the main menu. 

2.  Tap the UP button until ”TIME” is displayed, press ENTER. 

3.  Tap the UP button until “LIFE” is displayed, press ENTER. 

4.  Press MODE/ESC to return to the main menu. 

Summary of Contents for E Spot Led

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands