w w w . e l a t i o n l i g h t i n g . c o m
13
DTW BLINDER 350 IP™ User Manual
25° NARROW BEAM FRESNEL FILTER INSTALLATION
1.
Hold lens filter in front of the COB module so that both small black raised plastic
tabs are positioned horizontal at 9 and 3 o’clock. (See image below left)
2.
Insert lens into COB module. (See image below right)
3.
While applying gentle pressure against the lens, slowly turn the lens
counter-clockwise a ¼ turn, until both small black raised plastic tabs are positioned
vertical at 12 and 6 o’clock. (See image below)
ENSURE ALL LEN FILTERS ARE SECURELY INSTALLED AS ILLUSTRATED
ABOVE BEFORE THE FIXTURE IS INSTALLED ON TRUSS AND/OR RIGGING.
