Elation Design Spot 300E, Manual

Page: 23 / 60

Design Spot 300E™
©Elation Professional, Los Angeles Ca. 23 www.ElationLighting.com
Test Channel PAN …… Test function
Manual Control
PAN PAN =XXX
Fine adjustment of the lamp
E
ffe
ct
A
d
ju
st
Calibrate Values --Password--
Color wheel
:
Password=XXX
Color wheel=XXX
:
Calibrate and adjust the
effects to standard/right
position. Password “050”
User Mode XXXXXX (Band)
User Mode A
User Mode B
User Mode C User selectable operating
modes. Allows channels
assignment to be modified
U
se
rs
M
o
d
e
S
e
t
Edit User Mode PAN
:
PAN = CH01
:
Preset User modes
Select
Programs Auto Pro Part 1
Auto Pro Part 2
Auto Pro Part 3 Program 1 ~ 10 Program 1
Program 1 ~ 10 Program 2
Program 1 ~ 10 Program 3 Select programs to be run
Edit Program Program 1
:
Program 10
Program Test
Step 01=SCxxx
Step 64=SCxxx (“STEP
XX”)
Testing program
Program in loop
Save and exit
Edit Scenes Edit Scene 001
~ Edit Scene
250 Pan, Tilt,…
--Scene Time--
Input
By
Outside
Pan=xxx
TIME=xx.xs
Save and automatically
return
Manual scenes edit
E
d
it
P
ro
g
ra
m
Rec. Controller XX~XX Automat. scenes rec
8.1 Function Mode:
8.1.1 “Set DMX Address” - DMX address setting – This function is used to set or
adjust the fixture’s starting DMX address. Every device controlled by DMX has to have a
unique starting address. The addressing feature is what allows DMX to function
properly. The DMX address of a fixture is what allows it to communicate with a controller
properly. The DMX addressing also allows the fixture to ignore any DMX information
coming from the controller that is not meant specifically for the fixture. Because each
fixture is connected in a daisy-chain fashion it is imperative to assign a proper and
unique starting DMX address to each and every fixture. The DMX address is
non-destructive and will remain in the fixture’s memory even when the power to the unit
is switched off. Memory is backed-up and retain by an internal power source that should
last about five years. For proper DMX addressing see Section 9/Page 33 of this user
manual.
8.1.2 “Value Display” - Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel. The display will