Elation DARTZ 360 User Manual Download Page 25 | Manualshive

Page: 25 / 29

background image

25

www.elationlighting.com

E R R O R C O D E S

Error Codes are subject to change without any prior written notice.

ERROR CODE

DESCRIPTION

PAN

The PAN movement is not located in the default position after the reset.

This message will appear after a fixture reset if the magnetic-indexing circuit

malfunctions (sensor failed or magnet is missing) or there is a motor failure

(defective motor or a defective motor IC drive on the main PCB). This error may

also be displayed if the head/yoke was blocked during a reset function.

TILT

The TILT movement is not located in the default position after the reset.

This message will appear after a fixture reset if the magnetic-indexing circuit

malfunctions (sensor failed or magnet is missing) or there is a motor failure

(defective motor or defective motor IC drive on main PCB). This error may also be

displayed if the head was blocked during a reset function.

CMY

The CMY movement is not located in the default position after the reset.

This message will appear after a fixture reset if the magnetic-indexing circuit

malfunctions (sensor failed or magnet is missing) or there is a motor failure

(defective motor or defective motor IC drive on main PCB).

CTO

The CTO movement is not located in the default position after the reset.

This message will appear after a fixture reset if the magnetic-indexing circuit

malfunctions (sensor failed or magnet is missing) or there is a motor failure

(defective motor or defective motor IC drive on main PCB).

COLOR

The COLOR wheel movement is not located in the default position after the reset.

This message will appear after a fixture reset if the magnetic-indexing circuit

malfunctions (sensor failed or magnet is missing) or there is a motor failure

(defective motor or defective motor IC drive on main PCB).

GOBO

The GOBO1 wheel movement is not located in the default position after the reset.

This message will appear after a fixture reset if the magnetic-indexing circuit

malfunctions (sensor failed or magnet is missing) or there is a motor failure

(defective motor or defective motor IC drive on main PCB).

GOBO_R

The GOBO1_R movement is not located in the default position after the reset.

This message will appear after a fixture reset if the magnetic-indexing circuit

malfunctions (sensor failed or magnet is missing) or there is a motor failure

(defective motor or defective motor IC drive on main PCB).

GOBO2

The GOBO2 wheel movement is not located in the default position after the reset.

This message will appear after a fixture reset if the magnetic-indexing circuit

malfunctions (sensor failed or magnet is missing) or there is a motor failure

(defective motor or defective motor IC drive on main PCB).

3_PRISM

The 3 PRISM wheel movement is not located in the default position after the reset.

This message will appear after a fixture reset if the magnetic-indexing circuit

malfunctions (sensor failed or magnet is missing) or there is a motor failure

(defective motor or defective motor IC drive on main PCB).

3_Prism1Rot

The 3 Prism1Rot movement is not located in the default position after the reset.

This message will appear after a fixture reset if the magnetic-indexing circuit

malfunctions (sensor failed or magnet is missing) or there is a motor failure

(defective motor or defective motor IC drive on main PCB).

Line_PRISM

The Line_PRISM wheel movement is not located in the default position after the

reset. This message will appear after a fixture reset if the magnetic-indexing circuit

malfunctions (sensor failed or magnet is missing) or there is a motor failure

(defective motor or defective motor IC drive on main PCB).

Line_Prism1Rot

The Line_Prism1Rot movement is not located in the default position after the reset.

This message will appear after a fixture reset if the magnetic-indexing circuit

malfunctions (sensor failed or magnet is missing) or there is a motor failure

(defective motor or defective motor IC drive on main PCB).

FOCUS

The FOCUS movement is not located in the default position after the reset.

This message will appear after the reset of the fixture reset if the

magnetic-indexing circuit malfunctions (sensor failed or magnet is missing) or

there is a stepper motor failure (defective motor or defective motor IC drive on

main PCB).

«
...
23
24
25
26
27
...
»

Summary of Contents for DARTZ 360






























Reviews:

No comments

Related manuals for DARTZ 360

Brand: Fender Pages: 15

Brand: J D Squared Pages: 18

Brand: Yamaha Pages: 78

Brand: Fast Pages: 42

Brand: DARAY Pages: 28

Brand: Backyard Play Systems Pages: 64

Brand: Haenim Pages: 2

Brand: e+p Elektrik Handels Pages: 2

BOMAG BW 100 ADM-5

Brand: Fayat Pages: 216

Brand: B medical systems Pages: 28

Brand: Quivogne Pages: 13

Brand: Abbott Pages: 64

Brand: Gako Pages: 22

Brand: ABB Pages: 38

Dome OnTop Weight

Brand: ABS Pages: 8

Brand: ubicquia Pages: 36

Brand: Phenix Technologies Pages: 39

Brand: Triton Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands