background image

www.elationlighting.com

  

       

        14 

 

S Y S T E M   M E N U  

The fixture includes an easy to navigate system menu. The control panel (see image below) 
located on the front of the fixture, provides access to the main system menu and is where 
all necessary system  adjustments  are made to the fixture.  During normal operation, 
pressing MODE/ESC button once will access the fixture’s main menu. Once in the main 
menu you can navigate through the different functions and access the sub-menus with the 
UP, DOWN, RIGHT, and LEFT  buttons. Once you reach a field that requires adjusting, 
press the ENTER button to activate that field and use the UP and DOWN buttons to adjust 
the field. Pressing the ENTER button once more will confirm your setting. You may exit the 
main menu at any time without making any adjustments  by pressing the MODE/ESC 
button. 
 

u

 

NOTE:

 To access the LCD Menu Control Display via the internal battery, press and hold the 

MODE/ESC  button  for 3  seconds. The LCD Menu Control Display will shut OFF 
automatically about 1 minute from the last button press. 
 
 

 

 

 

 

 

 

 

 

Summary of Contents for DARTZ 360






























Reviews: