24
S Y S T E M M E N U
EDIT PROGRAM – Record Controller – Working with Built-In Program [continued]
To start an Auto Program, proceed as follows:
1. Slave Setting
Select
“Function Mode”
.
Press
ENTER
to confirm.
Select
“Set to Slave”
.
Press
ENTER
to confirm.
Select
“Slave 1”
,
“Slave 2”
or
“Slave 3”
.
Press
ENTER
to confirm.
Press
MODE/ESC
in order to return to the main menu.
2. Automatic Program Run
Select
“Function Mode”
.
Press
ENTER
to confirm.
Select
“Auto Program”
.
Press
ENTER
to confirm.
Select
“Master”
or
“Alone”
.
Press
ENTER
to confirm.
Press
MODE/ESC
in order to return to the main menu.
3. Program Selection for Auto Pro Part
Select
“Edit Program”
.
Press
ENTER
to confirm.
Select
“Select Programs”
.
Press
ENTER
to confirm.
Select
“Auto Pro Part 1”
,
“Auto Pro Part 2”
or
“Auto Pro Part 3”
and select which Slave program
is to be sent. Selection
“Part 1”
means, that the Slave unit runs the same program as the master
units.
Press
ENTER
to confirm.
Press
MODE/ESC
in order to return to the main menu.
4. Program Selection for Edit Program
Select “
Edit Program”
.
Press
ENTER
to confirm.
Select
“Edit Program”
.
Press
ENTER
to confirm.
Select the desired program to edit specific scenes into a specific program.
Press
ENTER
to confirm.
Press
MODE/ESC
in order to return to the main menu.
