14
G O B O I N S T A L L A T I O N
3. The GOBO Wheel module is secured to the fixture frame rail with (2x) sliding slotted brackets.
To remove the module, loosen the (4x) Philips-head screws just enough (do not remove them) to
allow the slotted brackets to slide down.
4. Locate the 15-pin connector and carefully unplug it from its socket. DO NOT USE FORCE TO
REMOVE! (Note: do not pull the connector out by its wires. The finger placement in the above photos was
used strictly to illustrate the connector location before and after).
l
