13
G O B O I N S T A L L A T I O N
1. Before removing either cover, place fixture on a stable flat surface in an INDOOR DUST FREE location.
Ensure moving head is locked into a neutral upright position with both PAN and TILT locks engaged. If
necessary, the fixture can be locked at various angles as seen below.
2. Loosen (2x) ¼-turn Phillips-head screws on cover. (screws integrated into covers - cannot be removed)
Gently lift covers and unclip safety cable to remove completely from the fixture.
It may be necessary to remove both covers to locate the GOBO Wheel module.
Pan Lock
Tilt Lock
