manualshive.com logo in svg

Elastix SIP Firewall, User Manual, Page: 28 / 42

Share
Download
Elastix SIP Firewall User Manual Download Page 28

 

26

 

 

Max_requestName_len

 

Max_requestName_len specifies the maximum request name size that is part of the CSeq 
ID. The Default is set to 20. The allowed range for this option is 1 - 65535 

 
Max_from_len

 

The  From  header  field  indicates  the  identity  of  the  initiator  of  the  SIP  request. 
Max_from_len specifies the maximum from field size. The allowed range for this option is 
1 - 65535. 

 
Max_to_len

 

The  to  header  field  specifies  the  desired  recipient  of  the  SIP  request.  Max_to_len 
specifies the maximum to field size. The Default is set to 256. The allowed range for this 
option is 1 - 65535. 

 
Max_via_len

 

The Via header field indicates the transport used for the SIP transaction & identifies the 
location where the SIP response is to be sent. 
Max_via_len  specifies  the  maximum  Via  field  size.  The  Default  is  set  to  1024.  The 
allowed range for this option is 1 - 65535. 

 
Max_contact_len

 

The Identifier used to contact that specific instance of the SIP client/server for subsequent 
requests. Max_contact_len specifies the maximum Contact field size. The Default is set to 
256. The allowed range for this option is 1 - 65535. 

 
Max_content_len

 

Max_content_len  specifies  the  maximum  content  length  of  the  message  body.  The 
Default is set to 1024. The allowed range for this option is 1 - 65535. 

 

4.3. Firewall Rules

 

The  firewall  rules  configuration  will  allow  the  administrator  in  configuring  what  traffic 
should  be  allowed  to  protect  SIP  PBX/Gateway  network  from  an  untrusted  wan  zone, 
besides DPI enabled SIP traffic and RTP traffic.  The administrator needs to specify the 
source and destination networks and port numbers and protocol that will be used as the 
matching criteria in the filtering rules and action to be taken on matching the filtering rule. 
The possible actions are to block the traffic and allow the traffic on matching the filtering 
rule.  The  rules  precedence  will  be  in  the  order  in  which  the  rules  configured  on  firewall 
rules table. 

Summary of Contents for SIP Firewall











































Reviews:

No comments