PHONE SETUP:
Wall Mount Holes are
available
Installing the Phone (Phone Stand):
For installing the phone on the table with the phone stand, attach the phone stand
to the bottom of the phone where there is a slot for the phone stand (Upper part,
bottom part).
CONNECTING THE PHONE:
Slot for the phone stand
if placing the phone on
the table
Slot for the wall mount
spacers if placing the
phone on the wall
Installing the Phone (Wall Mount):
1. Attach the two wall mount spacers to the slot for wall mount spacers on the back
of the phone.
2. Attach the phone to the wall via the wall mount hole.
Headset Port
PC Port
LAN Port
Power Headset Port Handset Port
4. Rotate the tab and plug it back into the slot with the extension up to hold the
To setup the LXP200 , follow the steps below:
1. Connect the handset and main phone case with the phone cord.
Handset Rest
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a
router (LAN side of the router) using the Ethernet cable.
Tab with extension up
3. Connect the 5V DC output plug to the power jack on the phone; plug the power
adapter into an electrical outlet.
3
Tab with extension down
tinuing, please wait for the date/time display to show up.
-
4
