6
7
The speakers will automatically connect to your device from now on.
Notes:
Fully charge the speaker before use: when the charge level of the
speaker is reduced its sound will become quieter.
In most cases, after breaking the connection, the NanoBeat por-
table speaker automatically reconnects to your external device. If
an automatic connection does not occur, turn the power of the
portable NanoBeat speaker off and then on again.
ELARI NanoBeat remembers previously connected devices. When
turned on again, the speaker automatically reconnects to previ-
ously connected devices, providing Bluetooth is turned on and
the speaker is within its signal range.
Bluetooth connectivity and signal transmission can be complicat-
ed by the presence of barriers between connected devices: wood,
metal and other materials can absorb or block the signal. For the
same reason the data transmission distance can be reduced.
The operating time of the device may vary depending on the tem-
perature or operating conditions.
Specifications:
Speakers characteristics:
4 Ω, 3 W, Ø36 mm
Frequency band
20 Hz – 20 kHz
Bluetooth
v 4.2 +EDR
Supported Bluetooth profiles
HSP, HFP, A2DP, AVRCP, SPP,
GAVDP1.2, IOP
Supported Bluetooth codecs
AAC, SBC
Power supply
Battery:
Li-Pol, 400 mAh, 3.7 V;
External power supply: 5 V, 0.3 A
Bluetooth connection radius
up to 10 m
Operating time in playback
mode
up to 4 hours
Battery charge time
2 hours
Scope of Delivery
Portable speaker, microUSB cable,
carrying strap, a brief manual
“Getting started”
Dimensions (l/w/h)
43 х 43 х 33 m
Weight
55.3 g
Troubleshooting suggestions
1. The device does not turn on
• Check battery charge level
2. Unable to charge the battery
