© Copyright ELAN Home Systems • 1999 • All rights reserved. 10/99
Page 3
E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
C
ONNECTIONS
VARIABLE
LINE OUTPUTS
Connecting the Z•300 to a Stereo PreAmp or Surround Sound Processor
VARIABLE
LINE OUTPUTS
Connecting Multiple Z•300s
CHANNEL LEVEL
ADJUSTMENTS
Channel Level Adjustments
Many audio receivers and pre-amps have a remote “Power Up”
output jack that sends a low voltage signal to other equipment
to turn them on or off. The Z•300 can utilize this signal to
mute the audio outputs of the amplifier, essentially switching
the Z•300 to “standby” mode. This feature eliminates any
noise that may be generated by source components when they
are not in use. Remote In: 5 to 24V AC/DC
Remote In/Out
