E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
I
NTRODUCTION
Boasting 150 Watts per channel at 2 ohms, the Z•300 is designed
and engineered to be the definitive cornerstone component for any
high fidelity audio system. The Z•300’s discrete output circuitry
easily powers up to four pair of 8 ohm speakers simultaneously,
eliminating the need for speaker selector boxes or load protection
devices. Buffered loop outputs provide easy connection of additional
amplifiers––a necessity when you are creating that “monster” home
theater or multi-room audio system where more than two channels
are required.
With its 1.75” low profile and elegant front panel design, the Z•300
Power Amplifier looks great and fits perfectly in any entertainment
center or rack of source equipment. Its small stature makes room for
bulkier components that normally require two and sometimes three
or four rack spaces.
...QUALITY DESIGN
At the heart of this amplifier’s benchmark design you’ll find quality
components and workmanship. Integrated output topology
guarantees audiophile sound–– power connections to each channel
from the whisper-quiet torroidal transformer maintain channel
separation, eliminating crosstalk and intermodulation distortion.
Three parallel amplifiers per channel provide high-current drive for
high-impact bass performance. An extremely low THD rating,
exceptional signal-to-noise ratio and dynamic frequency response
translate into true audio prowess.
The Z•300 also features three pair of gold-plated 5-way binding
posts for easy connection of multiple speaker pairs, a Remote Audio
Mute Circuit that eliminates any “noise” that might come through
the speakers when the source components are not in use, and
“installer-friendly” Channel Level Adjustments which are easily
accessible via the front panel.
Robust circuit protection is a standard in all Z•Series products.
Independent thermal and short circuit protection has been
implemented to protect the unit in the harshest operating conditions.
Outputs are safeguarded against over/under voltages, overloads
(including shorts), thermal runaway and instantaneous temperature
peaks. The design has been extensively tested to assure optimal
performance.
CRAFTED IN THE USA
Designed and engineered by ELAN’s audio engineers and
manufactured in our Lexington, Kentucky facility, the highest
quality control standards have been implemented to ensure a
superior product that will provide years of listening enjoyment.
Our commitment to you is quality.
S
PECIFICATIONS
POWER RATING • RMS
Output Power
150W @ 2.0 ohms per channel
100W @ 4.0 ohms per channel
60W @ 8.0 ohms per channel
GAIN
28dB, fixed
FREQUENCY RESPONSE
20 Hz to 20 kHz -.5 dB
Power Bandwidth
5 Hz to 30 kHz -3.0 dB
Signal-to-Noise
>110dB (A-weighted, 60W @ 8 ohms)
Channel Separation
>-70dB (channel to channel @ 1kHz)
HARMONIC DISTORTION
Total Harmonic Distortion
< .03% 20 Hz to 20 kHz
Intermodulation Distortion
> -90dB, 5Hz to 22 kHz
Voltage Gain (Av)
28
Slew Rate
>20V/microsecond
Input Impedance
33k ohms
Input Sensitivity
.707 VRMS (60W @ 8 ohms)
CONNECTORS
Input
Gold RCA phono
Output
Gold 5-way binding posts (3 pair)
REMOTE IN
5 to 24V AC/DC
REMOTE OUT
+12VDC
POWER REQUIREMENTS
120 VAC • 440W (average)
Power Supply
Ultra-high efficiencytoroidal
linear supply. 40,000 uF storage
capacitance effortlessly sustains
instantaneous high current
demand
DIMENSIONS/WEIGHT
Freestanding Model
1.75 x 17.0 x 10.0 inches
4.5 x 41.3 x 25.4 cm
Rackmount Model
1.75 x 19.0 x 10.0 inches
4.5 x 46.3 x 25.4 cm
Weight
5.0 lbs
©Copyright 1999 ELAN Home Systems, LLC. ELAN, ELAN Home Systems, Z•300, Z•660,
are registered trademarks of ELAN Home Systems, 2428 Palumbo Drive, Lexington, KY
Limited Warranty
ELAN HOME SYSTEMS, L.L.C. (“ELAN”) warrants the Z•300 TWO-CHANNLE POWER AMPLIFIER manufactured by it
to be free from defects in materials and workmanship for two (2) years from the date of purchase. If within the
applicable warranty period above purchaser discovers such item was not as warranted above and promptly notifies
ELAN in writing, ELAN shall repair or replace the items at the company’s option. This warranty shall not apply (a) to
equipment not manufactured by ELAN, (b) to equipment found to have been installed by other than an authorized
ELAN installer, (c) to installed equipment which is not installed to ELAN’s specifications, (d) to equipment found to have
been repaired or altered by others than ELAN, (e) to equipment found to have been subjected to negligence, accident,
or damage by circumstances beyond ELAN’s control, including, but not limited to, lightning, flood, electrical surge, tor-
nado, earthquake, or any other catastrophic events beyond ELAN’s control, or to improper operation, maintenance or
storage, or to other than normal use of service. With respect to equipment sold by, but not manufactured by ELAN, the
warranty obligations of ELAN shall in all respects conform and be limited to the warranty actually extended to ELAN by
its supplier. The foregoing warranties do not cover reimbursement for labor, transportation, removal, installation, or
other expenses which may be incurred in connection with repair or replacement.
Except as may be expressly provided and authorized in writing by ELAN, ELAN shall not be subject to any other
obligations or liabilities whatsoever with respect to equipment manufactured by ELAN or services rendered by ELAN.
THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED AND IMPLIED
WARRANTIES EXCEPT WARRANTIES OF TITLE, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF
TWO-CHANNEL
POWER AMPLIFIER
ELAN “On-Site” Technical Support
1-800-622-ELAN (3526)
2428 Palumbo Drive • Lexington, KY 40509 • 1.606.269.7760 • FAX 1.606.269.7972
Page 2
© Copyright ELAN Home Systems • 1999 • All rights reserved. 10/99
