E L A N H O M E S Y S T E M S PVIA1VALET
© 2008 ELAN Home Systems • All Rights Reserved
Page 9
Applications
Local System or Home Theater Control Using
VIA!Valet
The VIA!Valet comes with a pre-terminated interface cable assembly that
combines Cat-5 and RG-59 coaxial cable for the Transmission of Power, IR
and Video signals between the PVIA1 Valet and the VIA!Valet Touch Panel.
The VIA!Valet can be used for any stand-alone (non-ELAN) system applica-
tion or as a Home Theater controller. The
Figure 2-4
below shows a basic
application using one VIA!Valet100EM, a PVIA1 Valet Wall Plate and an ELAN
IR Emitter to control an A/V Receiver.
A/V Receiver
PVIA1 Valet
To Front
of PVIA1
Valet
ELAN
IR Emitter
Figure 2-4: Stand-Alone Application
NOTE: When IR is connected to the front of the PVIA1 Valet, IR pass-
through on the rear is disabled
