Specifications
E L A N
gMV88 INSTALLATION MANUAL
©
ELAN
2015
All
rights
reserved.
Page
1
INPUTS & OUTPUTS
Source Inputs
HDMI
8 w/ audio breakout
HDBaseT ARP
8 incl. with HDBaseT
Analog Audio
16 pr RCA connector
Digital Audio
16 ea Optical SPDIF
16 ea RCA Coaxial SPDIF
Zone Outputs
HDBaseT
8 RJ45 Cat5e/Cat6/Cat7
HDMI
(mirrored to HDBaseT)
8 19pin standard HDMI
Analog Audio
16 pr RCA connector
Digital
16 ea RCA Coaxial SPDIF
AUDIO
Analog Inputs
Input Sensitivity
0-2Vrms
Lip Sync
0-170ms in 1ms increment
Analog Outputs
Volume Adjustment Range
-99.5dB to 0dB
Format Conversion
2ch PCM to analog
Lip Sync
0-170ms in 1ms increment
Tone/EQ Range
-20dB to +20dB in .5dB increment
Digital Inputs - Optical & Coaxial
Format
Dolby 5.1, DTS, PCM Stereo
Format Conversion
2ch PCM to Analog stereo D/A
Lip Sync
0-170ms
Digital Outputs -Coaxial & HDMI
Format
PCM (7.1ch) SPDIF from digital inputs
Format Conversion
2ch SPDIF from analog sources (requires
mirror of
analog zone output)
Lip Sync
0-170ms (requires mirror of analog zone
output)
Tone/EQ
Bass/Treble/5 band (requires mirror
of analog zone output)
HDMI Pass Through
Format – All audio formats including:
PCM (7.1ch) SPDIF, Dolby
©
Digital
& True HD, DTS-HD
©
& Master Audio
VIDEO
HDMI Inputs/Outputs
•
HDMI 1.4a compliant
•
3D capable
•
36 bit deep color
•
HDCP 1.1 compliant
•
6.75 Gps data rate
•
1080p, 1920x1080@60Hz,
HDTV compatible 340MHz up
to 16 bit Y-U-V 444 supported
@ 1080p/60)
HDBaseT Outputs
•
HDMI compliant to v1.4a
•
3D capable
•
Refresh rates 24Hz, 30Hz, 60Hz
•
Uncompressed video resolution
1080p, 1920x1200
•
Deep Color 24-48 bit
•
Vertical Frequency
Range 50 – 60 Hz
•
Digital Audio PCM/7.1ch formats
including Dolby Digital,
•
True HD, DTS-HD & Master Audio
Zone Outputs
Bi-directional serial and IR, Ethernet
Chassis Control
Ethernet, Serial RS-232
GENERAL
Dimensions w/feet
(7U without feet)
17" x 12-1/4” x 14”"
431.80 x 311.15 x 355.60 mm
Included in box
(1) installation manual
Certifications
CE, UL, IC, FCC
POWER
Mains supply
120/240 V~, 50Hz/60Hz, 3A max
Power Consumption
Mains off: < 0.01W
Networked standby, RS-232 only connected: < 0.5W
Networked standby, TCP/IP only connected: < 1.0W
Networked standby, RS-232 & TCP/IP connected: < 1.0W
Automatic networked standby mode is activated
10 minutes after loss of control signal via
Ethernet control port or RS-232 control port.
Specifications and descriptions subject to change due
to product upgrades and improvements.
