OWNER’S MANUAL
EL-NVR
36
www.elanhomesystems.com
ALARM SETUP
Click settings ( )to enter
NVR SETTINGS
, and press
ALARM
(
) in the left pane to enter the
ALARM
SETUP
page� The setting options are described below�
Alarm Setup > General
Alarm Input Type:
Set the alarm sensor to Normally Open (NO), Normally Closed (NC), or IP Camera� The last option will
trigger the alarm only when receiving a signal from IP cameras�
Motion Enable:
Switch on/off motion detection� Remember also to set the motion detection area in the tab
MOTION
AREA.
Motion Sensitivity:
Adjust the sensitivity of motion detection� Higher sensitivity indicates that the alarm can be more easily
triggered�
Save Event Snapshot:
Enable to store a snapshot on the hard drive when an alarm is triggered�
