Elan EL-4KM-VW44, User Manual, Page: 4 / 24

EL-4KM-VW44 USER MANUAL
04 www.elanhomesystems.com
EL-4KM-VW44
1
2 3 4 1 2 3 4
IR Input IR Output
RS-232
TCP/IP 1 2 3 4 1 2 3 4
HDMI Output HDMI Input
VGA 1 VGA 2 VGA 3 VGA 4
L/R 1
L/R 2
L/R 3
L/R 4
IR Ext.
Off
On
VGA Input
12V 3A
VideoMatrix
1 2 3 4
IR
Power
Lock
Matrix Video-Wall Multi-View
HDMI VGA Input
Output
All
Menu Up Esc
Select Down Enter
EL-4KM-VW44
1 2 3 4 1 2 3 4
IR Input IR Output
RS-232
TCP/IP 1 2 3 4 1 2 3 4
HDMI Output HDMI Input
VGA 1 VGA 2 VGA 3 VGA 4 L/R 1 L/R 2 L/R 3 L/R 4
IR Ext.
Off
On
VGA Input
12V 3A
VideoMatrix
1 2 3 4
IR
Power
Lock
Matrix Video-Wall Multi-View
HDMI VGA Input
Output
All
Menu Up Esc
Select Down Enter
Rear Panel
1 2 3
10 8 9 7 6 5
4
Front Panel
1
2 3 4 5 6 7 8 9
19 18 17
16
15 14 13
1
LCD display – Shows the status of
input/output selection, EDID etc.
2
IR receiver window.
3
Power LED indicator.
4
Power button – Press to power On/Off
the Matrix.
5
Matrix mode button - Press to activate
Matrix mode.
6
Video-Wall mode button - Press to
activate Video-Wall mode.
7
Multi-View mode button - Press to
activate Multi-View mode.
8
HDMI output selection button 1 to 4 - To
select the output from 1 to 4.
9
All button for HDMI outputs – All
outputs will work as one (Selects all
outputs).
q
Menu button – Press to enter EDID set
mode (see page 5).
w
Up selection button - Press to change
segment’s value.
e
ESC – Press to quit EDID set mode.
r
Lock indicator.
t
Lock button – Press to lock the buttons
of the front panel.
y
HDMI input selection button - Press to
individually change inputs 1-4 to HDMI.
u
VGA input selection button - Press to
individually change inputs 1-4 to VGA.
i
Input selection button 1 to 4 – Press to
select the input from 1 to 4.
o
Selection button – Press to select
current setting.
p
Down selection button – Press to
change segment’s value.
a
Enter button – Press to confirm mode
selection or set EDID to specified INPUT
or copy EDID from specified OUTPUT to
specified INPUT.
1
IR inputs – 3.5mm stereo jack. Routes
IR to the current source selected IR
output. When using the EL-4KACC-
IR-CAB 5v-to-12v IR converter cable
ensure cable direction is correct.
2
IR outputs – 3.5mm mono jack –
Source specific routed IR.
3
VGA inputs with associated 3.5mm L/R
Analog audio – Connect to VGA sources
NOTE: Either HDMI OR VGA signal type
must be assigned per source input.
Both video inputs cannot be active at
the same time.
4
TCP/IP (RJ45) – Connect to LAN for
TCP/IP control of Matrix or control by
built-in Web-GUI interface.
5
RS-232 port – For control of the Matrix
switcher from PC or control processer.
6
HDMI output – Connect to HDMI
displays.
7
HDMI inputs – Connect to HDMI
sources.
8
HDMI active connection LED - Lit when
active HDMI connection is connected.
9
IR input for matrix control – For hard
wired IR connection. Connect to ELAN
control processor.
q
Power port – Use supplied 12V 3A
DC adaptor to power.
w
Power switch - Turn Matrix On/Off
10 11 12
20
11
Panel Descriptions