5 of 6
g!
C
ONFIGURATION
D
ETAILS
The following table provides settings used in the g! Configurator when connecting to the DSC MAXSYS Series control panel. Please refer to the
Configurator Reference Guide
for more details.
o
“<Select>”
Select the appropriate item from the list (or drop-down) in the Configurator.
o
“<User Defined>”, etc.
Type in the desired name for the item.
o
“<Auto Detect>”, etc.
The system will auto detect this variable.
Devices
Variable Name
Setting
Comments
Communication Devices
Name
<User Defined> (Default:
Security
)
Type
Serial Port
SerialBrick Name
N/A
Communication Type Standard Connection
Location
<User Defined> (Not Required)
Com Port
<Select>
Security Panels
Name
<User Defined> (Default:
DSC MAXSYS
)
Device Type
DSC MAXSYS
Location
<User Defined> (Not Required)
Comm Device
<Select> (Default:
Secuirty
)
PIN
Set Button
<User Defined>
Click the
Set
button, then enter the PIN
Name Show Auto Keys
Disarm
Disarm Yes NO 4
Mode 1
Arm Yes NO 4
Partions
Name
<Auto Detect> (Default:
Auto Detect Partition X
)
User Number
0
Show Partition
<Select> (Default:
Yes
) (See Note 1)
Areas in Partition
<User Defined> (Not Required)
Zones
Name
<User Defined> (Default:
Auto Detect Zone X
)
Enable Bypass
<Select> (Default:
Yes
)
Notes:
1. Set
Show Partition
to No for any partitions that are not used, or for partitions that should not be displayed in the g! Viewer interface.
