E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
© ELAN Home Systems 2009 • All rights reserved. Page 67
C2
Appendix C: Rack Mounting
Rack-Mount Brackets
When mounting the C2 controller in an equipment rack, use the included rack mount brackets for secure mounting
and proper ventilation. The C2 requires one rack space. To install the C2 into a standard 19” equipment rack:
1. Mount the brackets onto the C2 chassis from the front (Figure C-1).
Figure: C-1
2. Ensure that the brackets are flush with the front of the C2. Install each of the eight screws (included) through
the side mounting flanges into the holes in the sides of the unit as shown in Figure C-2. Hand tighten screws!
Over-tightening could cause damage to the C2 Communications Controller.
Figure: C-2.
3. Once the brackets are securely mounted, install the entire assembly into a standard 19” equipment rack from
the front using four rack screws (not included).
19" Equipment Rack
Rack Screws
Figure: C-3.