4
2. Set Up
3. Operating Instructions
Before plugging your unit in, be sure the source voltage in your area matches the voltage required for your
every suit. Every unit is available in 100v and 240v version. Because line voltage may vary from venue to
venue, you should be sure your unit voltage matches the wall outlet voltage before attempting to operate
you unit.
To ensure proper DMX data transmission, when using several DMX units try to use the shortest cable path
possible. The order in which units are connected in a DMX line does not influence the DMX addressing.
For example; a unit assigned a DMX address of 1 may be placed anywhere in a DMX line, at the
beginning, at the end, or anywhere in the middle. When a unit is assigned a DMX address of 1, the DMX
controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX
chain.
You can use the suit in 3 ways:
1. Auto Mode
-The unit will automatically chase through the different colors.
2. DMX control mode
– This function will allow you to control each individual units traits with a standard
DMX 512 controller.
3. Master-slave mode
– One unit will work as the master in the one of the above three modes, other
units in the chain will work in synchronization towards the master.
• Multi-Colors
• Master/Slave synchronization
• Color Strobe
• LED operation menu with function buttons
• Electronic Dimming 0-100%
• DMX-512 protocol
• Daisy Chain Units Together in DMX Mode
There are four touch buttons under the LED display: Menu, Up,
Down, Enter. Normally, the LED will display the current DMX ad-
dress code of the fixture. At this time, presses up and down to
choose the functions you want
LED Operation Menu: LED screen with four touch buttons (MENU, UP, DOWN and ENTER).
Press MENU to return to the upper menu; Press UP or DOWN to scroll into the menu options or to adjust
the values. Press ENTER to confirm.
Features
Power Supply
DMX Linking
Touch Buttons