6
3.1 Installating requirements
3.3 Power supply connection
3.2 Mosaic
• This equipment can be used in many places, it can hang and put on the ground.
• Choosing a suitable place to put or hang the equipment when installation. Must be use the special
screws and hook to make sure the lamp’s weight is in the weight range.
• When installing the equipment,ensure no inflammable and explosive goods at 0.5 meter distance.
• Please ask the professionals to install the equipment,any improper installation will cause personal injury
or material damage.
• To prevent others entering the working ares below,the installation or maintenance of equipment with
suitable and stable platform
• The equipment must be placed in ventilated place, at least 50 cm from the ground,please ensure that
the vent without clogging.
• This lamp has stitching, easy installation, splicing and elongated matrix mosaic (below)
The equipment can be used in the wide voltage input. Please make sure the voltage is the scale of rated
voltage when connecting the power.The equipment can adapt to 100V to 240 V AC voltage and 50-60 Hz.
When the lamp power supply is connected via the power jack “POWER IN” and “POWER OUT” were con-
nected end to end, to connect up to 10 similar fixtures
3. Installation
Matrix combination
Elongated combination
s
Connection
Pin
Brown
AC Live
1
Blue
AC Neutral
2
Green/Yellow
AC Ground
3