4
1.4 Safety Instructions
2.1 Dimensions
• This product is I level protection equipment,so it is must be connected well and connected by the profes-
sional people.
• Make sure the voltage don’t be above or below which the user manual rated values.
• Confirm the power cord is not a sword cut or damaged.
• Must be cut off the power supply in the condition of no using or cleaning.
• Only allowed with the power cord plug connection.Please do not force when unplug the power cord to
pull the plug.
• Be careful in the process of installation of equipment.Avoid touching the bare wire,otherwise it will suffer
fatal shocks.
• Don’t look the light source directly,otherwise it will hurts the eyes.
• When choosing installation position of equipment and the equipment must be more than 0.5m distance
between objects.
• Please use the equipment wires appropriate.
• Without the manufacturer’s authorization or laypeople don’t remove,repair and modification of equip-
ment.
• The maximum operating temperature is 40ºC don’t operate the equipment when it is over 40ºC
• Do not connect the equipment to the dimmer equipment
• Under 120V voltage,output power don’t series more than 5 pcs equipment,voltage 230V. Output power
don’t series more than 10 pcs
2. Introduction
Measurements in millimeters