ELAN Lighting CITYCOLOR-551-IP User Manual Download Page 3

3

1. Safety

Warning!

 To prevent or reduce the risk of electrical shock or fire, 

do not expose this unit to rain or moisture.

PLEASE 

consider that damages caused by manual modifications 

to the device are not subject to warranty.

Caution! 

There are no user serviceable parts inside this unit. 

Do not attempt any repairs your-

self; doing so will void the product’s warranty.

 In the unlikely event your unit may require servi-

ce please contact Acson Comercial.

PLEASE

 recycle the shipping carton when ever possible

To optimize the performance of this product, please read these operating instructions carefully 
to familiarize yourself with the basic operations of this unit. These instructions contain important 
safety information regarding the use and maintenance of this unit. Please keep this manual with 
the unit, for future reference.

• 

To reduce the risk of electrical shock or fire, do not expose this unit to moisture.

• 

Do not spill water or other liquids into or on to your unit.

• 

Be sure that the local power outlet match that of the required voltage for your unit,

• 

Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or break 
off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in 
case of a internal short. 

• 

Disconnect from main power before making any type of connection.

• 

Do not remove the cover under any conditions. There are user serviceable parts inside.

• 

Never operate this unit when its rear cover is removed.

• 

Never plug this unit into a dimmer pack.

• 

Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this 
device and a wall.

• 

Do not attempt to operate this unit, if it becomes damaged.

• 

This unit is intended for indoor use only; use of this product outdoors voids all warranties.

• 

During long periods of non-use, disconnect the units main power.

• 

Always mount this unit un safe and stable matter.

• 

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon 
or against them, paying particular attention to the point they exit from the unit.

• 

Cleaning unit should be cleaned only as recommended by the manufacturer. See ‘Cleaning” for details.

• 

Heat –The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other 
appliances (including amplifiers) that produce heat.

• 

The unit should be serviced by qualified service personnel when:

      A.

 The power-supply cord or the plug has been damaged.

      B.

 Objects have fallen, or liquid has been spilled into the appliance.

      C. 

The appliance has been exposed to rain or water.

      D. 

The appliance does not appear to operate normally or exhibits a marked change in performance.

Precautions

Summary of Contents for CITYCOLOR-551-IP








Reviews: