ELAD TM-2
User Manual - Rev 2 - 05/2021
© 2021 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated
in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
9
Step3.
Run the Tmate2CatConsole.exe that you downloaded and unzipped. The following window will
come up :
In serial port select the other end of the splitter we set up, so Com11 and Connect to set to Perseus. If it
is all setup correctly when you hit start, you should see the line of text above the start button that says
“Microtelecom PERSEUS: …”
Remember the steps, Virtual Com Software, Perseus Software, TMate Cat Console in that order, if you
load in different order, it will not work.
