ELAD TM-2
User Manual - Rev 2 - 05/2021
© 2021 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated
in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
7
4
Using TMate2 with Perseus V5 Software
The ELAD TMate2 can be used with the Perseus SDR and the Perseus V4 & V5 software that is supplied
by Microtelecom s.r.l.
There are some additional steps needed for it to function compared to the ELAD FDM-SW2 software.
You will need a Virtual Com Port application such as VSPE or com0com or any other, there are many
available, for this document purpose, VSPE from Eterlogic will be used.
Then
you
will
need
our
ELAD
Tmate2ConsoleSetupv009.zip
zip
file
from
http://sdr.eladit.com/ACCESSORIES/TMATE2/index.php?lang=EN
unzipped to a location on your PC.
The usage outline; configure the virtual serial port application, launch the Perseus software then run
Tmate2CatConsole.exe and all should be up and running.
Step 1.
Configuring the Virtual Com Port Software, we need a connector and splitter connection, The
connector com10 and a splitter Com10 => Com11 :
This shows the connector on Com10 and the Splitter from Com10 => Com11, once you have added each
device, then hit the Play button, third icon from left. Then VSPE should be running.
