Page 7 of 10
User Manual
PAT-Press-Box
Release 1.0
4 Connectors
1.
Banana sockets (2 or 4 mm) at the box cover
(Table shows standard connection to potentiostat or battery tester for full cell control)
2.
Analog Out connector (Sub-D M9) at the rear of the box
PAT-Press Box,
banana sockets at
the box cover
Potentiostat
Battery tester
PAT-Core connection
1
WE Current
Plus Current (B+)
Lower electrode
1S
WE Sense
Plus Sense (S+)
R
Ce Sense
(if available)
Not connected
Reference ring
2S
RE
Minus Sense (S-)
Upper electrode
2
CE
Minus Current (B-)
GND
GND (if available) of WE
GND (if available) or B+
Pin #
Signal
Comment
2
Temperature
8 °C/V, 0 V correspond to 0°C
5
Pressure
0.3 bar/V, 0 V correspond to 0 bar abs
9
GND
Signal ground (COM), galvanically isolated from earth (PE)