EN
TECHNICAL DATA
Boj 230/20 NödBoj
230/20
Power output:
23 W
24 W
Voltage:
230 VAC
230 VAC
(Indicated by blue rubber base)
(Indicated by blue rubber base)
Lifespan:
> 30,000 hours. L70
> 30,000 hours. L70
Light source:
Bridgelux
Bridgelux
Battery:
-
NiMH 2200 mAh
Colour temperature:
5000 K
5000 K
Luminous flux, light source:
2250 lm
2250 lm
Luminous flux, light fitting:
2030 lm
2030 lm
Luminous flux, emergency light: -
340 lm
Light quality:
All-round, non-dazzling
All-round, non-dazzling
IP rating:
IP 54 (IP 44 with CEE)
IP 54 (IP 44 with CEE)
Ambient temp.:
-25°C – +45°C
-25°C – +45°C
Weight:
2.0 kg
2.2 kg
Size LxWxH:
190 x 190 x 260 mm
190 x 190 x 260 mm
Approval:
CE
CE
EU Declaration of Conformity, see
www.elbjorn.com
.
INSTALLATION
El-Björn’s ventilated protective bag is the best way
to protect the lamp head or light fitting from dirt.
EBL Boj/NödBoj 230/20 can be supplied with
various plug types.
The fold-away multipurpose hook allows the lamp
to be suspended in various ways. The hook can
also be used as a cable strainer for daisy chain
lighting. The three M8 bushings on the base of
the fixture allow connection to different types of
stand.
A cable strap is available as an optional accessory,
for use as a carrying handle or as a flexible
suspension system.
Each fixture has sockets for daisy chain
connection.
12
SERVICE
EBL Boj/NödBoj 230/20 normally requires
no servicing. Clean the outside of the unit and
replace the protective bag as necessary.
Always disconnect the power supply
before performing maintenance on the
EBL Boj/NödBoj 230/20.
Replace the lamp head as necessary. Loosen
the screws on the neck of the light fitting, then
unscrew and replace the lamp head and tighten
the screws. For optimal function, always use an
original El-Björn lamp head. El-Björn’s new
protective bag is the best way to protect the lamp
head or light fitting from dirt.
NOTE! When replacing the lamp head, do not touch the LED
unit since static electricity can damage the LED and electronics.
Replacement of the LED and electronics must always
be done in an EPA area (ESD-protected area free of
static electricity).
In order for the warranty to remain valid, this type of
servicing must either be carried out by a staff member
approved by El-Björn or the product must be sent to
El-Björn.
