- 9 -
STEP 3
Place the bottom bracket with the installed radiator inside the
chassis and tighten the thumb screws. After that, move the radiator
as far back as possible against the PCI slot brackets.
STEP 3
PREPARING THE EK-Quantum Reflection
2
Torrent DDC 4.2 PWM D-RGB DISTRIBUTION PLATE
STEP 1
STEP 1
Take the metal radiator bracket and tighten it on the EK-Quantum
Reflection2 Torrent DDC 4.2 PWM D-RGB distribution plate with two
(2) M4x8 DID7991 screws from the mounting mechanism packaging.
For this step, you need:
2.5 mm Allen Key
M4 x 8 DIN7991 SCREW
METAL RADIATOR
BRACKET