- 11 -
STEP 1
Connect the 3-pin D-RGB LED connector from the GPU water block
and fans to the
D-RGB header
on the motherboard. The lights will work
if the pin layout on the header is as follows:
+5V, Data, Empty, Ground
.
Please ensure the arrow indicated on the connector
is plugged into the +5V line, as indicated on your
motherboard. If you connect LEDs to the 12V RGB header,
it will damage them.
D-RGB Header
RGB Header
STEP 3
Once you have selected the mounting position within the case, you
must align the fan mounting holes with the ones in the case. Use the
enclosed self-tapping screws to install the unit firmly. Self-tapping
screws require more torque than threaded screws but don’t overdo it
with force applied.
STEP 3
STEP 1
CONNECTING THE D-RGB LIGHTS