ekwb EK-Quantum Kinetic TBE D5 PWM, Installation Manual

Page: 15 / 20

- 15 -
EKWB recommends using EK-Quantum Torque fittings
with the EK-Quantum Kinetic TBE D5 PWM series
reservoir pump combo units. If you use barbs ensure
that the tubes are securely attached using hose clamps
or an appropriate substitute.
All unused ports should be blocked using the enclosed
G1/4 Plugs and 6mm Allen key.
CAUTION
The INLET port(s) (suction port) is the port with G1/4
threading plane.
OUTLET port must be placed always on the marked place.
Make sure not to use Fittings or barbs with G1/4 thread
longer than 5mm! All EK Fittings are compatible!
Ports on the top of the reservoir should only be used as
Inlet ports with the enclosed Internal tube (as shown on
pages 8 and 9).