- 11 -
Phillips Head Screwdriver
STEP 2
MOUNTING BACKPLATE ON PCB
Again, cut thermal pads to needed size. Thermal pads should be
placed on the back of PCB, as illustrated below. EK made sure to
provide you with more than an adequate quantity of thermal pads
to complete this Step.
STEP 2
For this Step, you will need:
Thermal Pad F 1.5 mm (5 pcs)
(3830046996749)
120 mm
16 mm
F1.5
F1.5
F1.5
F1.5
F1.5
F1.5
F1.5
F1.5
F1.5
Thermal Pad F 1.0 mm
SCREW AX1
M2.5 x 10
(4x)
SCREW AX1
M2.5 x 7 (4x)
F1
Use four (4) M2.5 x 10 AX1 Screws and four (4) M2.5 x 7 AX1 Screws.
Tighten the screws evenly using the Phillips head screwdriver.
ATTACHING THE BACKPLATE TO THE GRAPHICS CARD
For this Step, you will need:
10 mm
7 mm
Karton - Screw size
guide
M2.5 x 10 AX1
Screw (5 pcs)
M2.5 x 7 AX1
Screw (8 pcs)
Standard mounting kit 1