CIRCULAR PEARL EMERGENCY INSTALLATION INSTRUCTIONS
9
17. NON MAINTAINED/ MAINTAINED JUMPER
The Emergency light in the Circular is de designer for use in no-maintained mode only.
Figure 10: Maintained/non-maintained jumper
Jumper
INDICATOR
STATUS
DESCRIPTION
NON MAINTAINED
MAINTAINED MODE
LED is only ON in
emergency
Not supported
18. DISCHARGE RATING SELECTION
The inverter supports a number of discharge ratings which can be selected by the user. The output from
the LED scale based on the discharge rating (
see ektor.com.au for output information
).
Figure 11: Discharge rating selection
Remove expansion cover
C
B
A
HOURS
A
B
C
1 hour
2 hours (default)
3 hours
4 hours
Central battery operation
N/A
N/A
OFF
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
OFF
ON
ON
OFF
OFF
ON
OFF
ON
OFF
ON
ON
16. WIRELESS DAUGHTERBOARD
The Circular inverter used in emergency models also support an optional wireless daughterboard. The driver
must be disconnected from mains and battery must be removed, before installing or changing any expansion
module. More information and a list of other accessories can be found in the
Wireless design and installation
guide.
The assembly for this part onto the inverter is shown below:
Figure 9: Daughterboard assembly diagram
2
1
Wireless daughterboard (6118)(optional)
Circular inverter (1222, 1223, 1224, 1225)
1
2
