Wear appropriate protective gloves
when inserting and testing the blade.
The choice of blade insert
7
depends on the inten-
ded task. The supplied blade inserts
7
are suitable
for a wide range of common uses (see Fig. B–D).
Release the union nut
6
by turning it anticlock-
wise using the key
8
.
If necessary, remove the blade insert
7
. Push
another blade insert into the tool holder
5
as
far as it will go.
Tighten the union nut
6
again by turning it
clockwise using the key
8
.
Check that the blade insert
7
is securely held
in place.
Q
Working Instructions
Always work away from the body.
Q
Maintenance and Cleaning
Before performing any cleaning
or maintenance work, always remove the mains
plug from the socket.
The device must be clean, dry and free of oil
or grease at all times.
Make sure that the ventilation slots
4
are
always clear.
Clean the tool holder
5
regularly.
Clean the blades of wood or other materials
and residual dirt.
No liquids must be allowed to enter the interior
of the device.
Use a soft, lint-free cloth to clean the housing.
Never use petrol, solvents or cleaning agents
which attack plastic.
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading
