Back Panel
CV
Control Voltage jacks
Expansion Reader
3,5in Floppy reader
Trimmers
Vel. Sens, Mod Depth, Polarity, Phase, Echo
Wheels
Modulation & Pitch wheel behaviour
Use control voltage to modulate the labeled
parameters. Use the small trim knobs next to the jack
for adjusting the level of modulation.
The EG CV output has a slighlty smoothen signal.
SineSynth comes with 5 included floppy disks containing 10 waveforms each. When a disk is loaded you can use the BROWSER up/down arrows to select between the 10
waveforms on the disk to replace the defaul sinewave with. The current disk name and waveform index are displayed in the browser window.
Below is a chart of the included waveforms:
Waveform #
Use these trimmers to dial in the prefered levels and
behaviour of corresponding functions.
Set the destination for Mod wheel modulation and the
range of the pitch bend wheel with these buttons.
If set to LFO depth the mod wheel will scale the amount
set by knobs on the front panel.
Disk 2
Disk 1
Disk 3
1
2
3
4
5
6
7
8
9
10
Disk 4
Disk 5
