ASSEMBLY INSTRUCTION
OF THE RAFF-I EXTERNAL VENETIAN BLINDS
FRONT GUIDE MOUNTING
Drill mounting holes in the guide from the front in the
numbers shown below, depending on the length of the
guide.
With the guide bar length:
≤ 150 cm: 2 fixings on the FS
≤ 250 cm: 3 fixings on the FS
> 250 cm: 5 fixings on the FS
> 300 cm: 7 fixings on the FS
Mount the MONOBLOCK EKOOKNA
Aluminum guide on the EVB or window frame using
assembly screws (not included). Plug from the front with
the enclosed aluminum profile.
Ø
10
Ø
5
Ø
10
Ø
5
ASSEMBLY OF THE GUIDING RAILS
ON THE SIDE
Drill mounting holes on the side of the guide in the
numbers shown below, depending on the length of the
guide.
With the guide bar length:
≤ 150 cm: 2 fixings on the FS
≤ 250 cm: 3 fixings on the FS
> 250 cm: 5 fixings on the FS
> 300 cm: 7 fixings on the FS
Attach the MONOBLOCK EKOOKNA
Aluminum guide to the side of the EVB or other surface
using assembly screws (not included in the set).
