PRODUCT MAINTENANCE
NP-DK50-Nx2VTM-AD-EN-6_04-2022
48
04/2022
Fig. 25: Venting pressure from the dryer chambers
Disconnect the hose (2) from the lower part of the condensate separator (3) (Fig. 26).
Fig. 26: Venting pressure from the cooler and condensate separator
The process of manually venting pressure
from the equipment is complete after
approximately 2 minutes.
18.14.
Replacement of the dryer’s
internal filters
Working
with
pressurised
pneumatic components poses a
risk of injury.
Prior to any work, disconnect
the equipment from the mains,
shut off the compressor and
vent
all
pressure
in
the
equipment to zero.
In normal operation, filter replacement must
be performed in the upper part of the dryer at
the defined interval.
Summary of Contents for DK50 4x2VT/M
