EKOM DK50 4x2VT/M, User Manual

Page: 25 / 60

INSTALLATION
04/2022 25 NP-DK50-Nx2VTM-AD-EN-6_04-2022
Prior to installation, ensure that
the compressor is free of all
transport
packaging and
stabilizers to avoid any risk of
damage to the product.
Remove all devices used to
secure the aggregates once the
compressor is installed and
levelled at the site of final
installation.
Fig. 8: Releasing the air pumps

Remove the transport stabilisers from
the air pumps (X, Y, Z) (Fig. 8).

DK50 4x2VT/M
– 8x mounts.

DK50 6x2VT/M
– 12x mounts
Assembly of the AD dryer

Remove the dryer from the packaging.

Install the dryer in its operating
position (Fig. 9).
At least two persons are needed
to handle the equipment.
Integrated handles are installed on the lower
brackets on the product. Each person must
grasp the equipment with one hand on a
handle and the other behind the dryer
chamber when moving the equipment.