background image

 

DK50 3x4VR/M 

10/2018 

 

NP-DK50-3x4VRM_ED-EN-2_10-2018 

  - 5-

IMPORTANT INFORMATION 

1.  CE MARKING 

Products  labelled  with  the 

CE

  marking  meet 

the  requirements  of  the  European  Union 
Medical Device Directive (93/42/EEC). 

 

2.  CONTRAINDICATIONS AND SIDE-EFFECTS 

There are no contraindications or side-effects known. 
 

3.  NOTICE 

The product is designed and manufactured to 
be  safe  for  the  user  and  its  surrounding 
environment  when  used  in  the  defined 
manner. Keep the following warnings in mind. 
This keeps risks to a minimum. 

 

3.1. 

General warnings 

  The user manual aids in correct installation, 

operation and maintenance of the product. 
It is included with the product and must be 
kept  close  to  it  at  all  times.  Careful  review 
of  this  manual  will  provide  the  information 
necessary  for  the  proper  operation  of  the 
product as intended.  

  The product contains a condensing-type of 

dryer, which has a separate user manual. 

  Only  the  original  packaging  ensures 

protection  of  the  equipment  during 
transport.  Save  this  packaging  should  you 
ever  have  to  return  the  equipment.  The 
manufacturer  is  not  liable  for  damages 
caused by faulty packaging when returning 
a product for transport during the warranty 
period. 

  Use  a  fork  lift  truck  or  similar  hoisting 

equipment for any movement or handling of 
the product. 

 

  The manufacturer only guarantees the 

safety, reliability and function of the 
equipment if: 

-    installation, new settings, changes, 

modifications and repairs are performed by 
the manufacturer or its representative, or a 
service provider authorized by the 
manufacturer. 

-

  the product is used pursuant to the user 

manual. 

 
3.2. 

General safetywarnings 

  Use  and  operation  of  the  product  must 

comply with all local codes and regulations. 
The  operator  and  user  are  responsible  for 
following  all  appropriate  regulations  in  the 
interests of performing work safely.  

  Only  the  use  of  original  parts  guarantees 

the  safety  of  operating  personnel  and 
reliable operation of the product itself. Only 
use accessories and parts mentioned in the 
technical  documentation  or  expressly 
approved by the manufacturer. 

  The  manufacturer  assumes  no  liability  for 

any  damages  or  other  risks  if  any 
accessories  or  parts  other  than  mentioned 
in the technical documentation or expressly 
approved  by  the  manufacturer  are  used. 
This  warranty  does  not  cover  damages 
originating  from  the  use  of  accessories  or 
consumables other than those specified or 
suggested by the manufacturer.  

  The  user  must  make  sure  that  the 

equipment  is  functioning  correctly  and 
safely every time it is used.  

  The  user  /  operator  must  be  capable  of 

safely  using  and  properly  operating  the 
product.  The  user  must  be  trained  to 
operate  the  product  and  must  be 
experienced. 

  Create operating regulations for the person 

operating the product. 

Summary of Contents for DK50-3X4VR/M


































Reviews: