EKOM DK 50 4X2VT/M, User Manual

Page: 26 / 60

INSTALLATION
NP-DK50-Nx2VTM-ADM-EN-1_06-2022 26 06/2022
Prior to installation, ensure that
the compressor is free of all
transport
packaging and
stabilizers to avoid any risk of
damage to the product.
Remove all devices used to
secure the aggregates once the
compressor is installed and
levelled at the site of final
installation.
Fig. 8: Releasing the air pumps

Remove the transport stabilisers from
the air pumps (X, Y, Z) (Fig. 8).

DK50 4x2VT/M
– 8x mounts.
12. PNEUMATIC CONNECTION
Connect the compressed air lines at (C) and
connect the equipment to the compressed air
system from the G3/4” threaded outlet ball
valve.
Fig. 9: Pneumatic connection