Ekol Clarity 30 Boiler Woodburning Stove, – INSTALLATION AND OPERATING INSTRUCTIONS.
REF: Ekol Clarity 30 Boiler Wood Version, MANUAL VERSION 1.1
DATE: 22.01.2014
INTRODUCTION
SAFETY
Safety is the most important consideration when using and installing your stove. If not installed and used correctly, a house
fire could result. Installation must comply with relevant national and local Building Regulations and fire safety standards.
IN THE EVENT OF CHIMNEY FIRE, EVACUATE THE PROPERTY AND CALL THE EMERGENCY SERVICES.
Your stove will be heavy and care needs to be taken when lifting - 4 people will normally be required to lift.
UNPACKING
Your stove will have several of its components stored inside the stove itself for transportation.
Do NOT drag the stove on its legs – it must be carefully lifted into place.
Inside the stove will be a flue connector collar. This simply bolts with the fixings provided onto the top or rear outlet of the
stove, depending on your choice of installation type. Ensure to secure the supplied circular blanking plate onto the other
outlet using a good bead of fire cement to seal both the collar and the blacking plate.
Inside the stove will also be an ash-pan which sits underneath the grate, and will require regular emptying. You will also find
a detachable tool for removal of the ash-pan.
You will also find a glove which must be used when opening the door or when adjusting air vents when the fire is hot.
There is also a removable baffle plate which rests on the top of the cylindrical section of the water jacket and the rear of the
firebox (see diagram fig1.) this plate can be removed periodically to aid cleaning of the stove flueways and for easier access
to the flue system. It is vital that the baffle is always replaced before use.
INSTALLATION
Installation of your stove must comply with relevant local and national Building Regulations and fire safety standards.
TECHNICAL
Your stove has been tested to CE and British standards conforming to EN 13240.
Model; “Ekol Clarity 30 boiler”
Nominal heat output total – 19.2 kW
Nominal output to space – 9 kW
Nominal output to water – 10.2 kW
Net Weight of Stove - 220 kg.
Max Height - 725 mm (see also Diagram Fig.2)
Max Width - 767 mm
Max Depth - 536 mm
Flue Diameter - 150mm (6”)
Mean flue gas temperature directly downstream of the flue spigot - 322 degrees C. (with closed doors).
Flue gas mass flow – 15.8g/s
Mean CO emission (at 13% Oxygen) – 0.48%
Net Energy Efficiency 73.8%
Maximum operating water pressure 2 BAR
