SITE REQUIREMENTS
The fireplace opening should be inspected and repairs made where necessary. Any chair brick
may be left in place.
The opening WIDTH and HEIGHT dimensions should be between 405mm and 440mm wide, and
565mm to 575mm high.
Opening DEPTH should be 220mm or greater. Opening DEPTHS include any plaster or infill pan-
els which form part of the installation.
This appliance requires a natural draught flue system which may be one of the following;
225mm x 225mm (9in x 9in) brick or stone.
175mm (7in) minimum diameter lined brick or stone.
175mm (7in) minimum diameter twin wall flue conforming to BS 715.
Any existing under grate draught device must be sealed off.
The opening wall must be non-combustible.
The appliance requires a hearth with non-combustible surface of at least 12mm thick. The top sur-
face must be at least 50mm above the surrounding floor level, or be surrounded by a raised edge
or fender 50mm high.
3
4.0
A
C
D
B
E
F
A. Opening height: 565mm min/575 mm max.
B. Opening width: 405mm min/440mm max.
C. Mounting depth: 220mm
D. Hearth must extend minimum of 150mm either side of the opening.
E. Hearth must extend minimum of 300mm in front of the opening.
F. Non-combustible hearth must be a minimum of 50mm in height, or
be surrounded by 50mm high fender.
©
2009 Focal Point Fires plc.
