Figure 6. Measurement setting dialog
List 4. Values of measurement setting dialog
Display
Type
Description
Data folder
Textbox
It selects a folder to store data.
Browse…
Button
Click this button before selecting a folder to store
data.
Then the dialog ”Reference of folder” will be displayed
and you can easily input folder to store data. It is
recommended that you use this button to correctly
input the pass name to folder.
COM Port
Radio button It specifies COM number of RS232C interface
connected to Sky Scanner.
Start Time
Textbox
It specifies starting time, stop time, and interval of
automatic measurement schedule. You can select
interval among 10, 15, 20, 30 minutes and 1 hour.
Finish Time
Textbox
Interval
List box
Site
parameters
Lat.
Lon.
Textbox
It inputs latitude and longitude of the site.
It inputs north latitudes and east longitude as plus,
south latitude and west longitude as minus.
Calibration
Change
Button
It displays a dialog to change calibration value of the
sensor.
Change the value into one we issue if necessary.
See below (3).
Comment
Textbox
It can input the comment to record in the header of
the data file.
OK
Button
It stores the setting of the setting dialog.
Cancel
Button
It goes back to the previous screen.
(3)Input and change calibration value
Calibration value is inherent in luminance and radiance sensor. It is a constant to
convert output voltage from the sensor to a physical value. (Luminance: kcd/m
2
,
Radiance :W/m
2
/sr) Figure 7 will be displayed when you click “Change” as shown in
Figure.6 to input or change calibration value.
15
